Windows Server 2008: Add, Modify & Remove Hyper-V Virtual Network



Share this article :

You can use Virtual Network Manager to add, remove, and modify the virtual networks. Virtual Network Manager is available from Hyper-V Manager.

To add a virtual network

1. Open Hyper-V Manager.

2. From the Actions menu, click Virtual Network Manager.

3. Under Create virtual network, select the type of network you want to create.

4. Click Add. The New Virtual Network page appears.

5. Type a name for the new network. Review the other properties and modify them if necessary.

6. Click OK to save the virtual network and close Virtual Network Manager, or click Apply to save the virtual network and continue using Virtual Network Manager.

Note:
You can use virtual LAN identification as a way to isolate network traffic. However, this type of configuration must be supported by the physical network adapter.

To modify a virtual network

1. Open Hyper-V Manager.

2. From the Actions menu, click Virtual Network Manager.

3. Under Virtual Networks, click the name of the network you want to modify.

4. Under Virtual Network Properties, edit the appropriate properties to modify the virtual network.

5. Click OK to save the changes and close Virtual Network Manager, or click Apply to save the changes and continue using Virtual Network Manager.

To remove a virtual network

1. Open Hyper-V Manager.

2. From the Actions menu, click Virtual Network Manager.

3. Under Virtual Networks, click the name of the network you want to remove.

4. Under Virtual Network Properties, click Remove.

5. Click OK to save the changes and close Virtual Network Manager, or click Apply to save the changes and continue using Virtual Network Manager.

Related posts

Windows Server 2003 Query Session
Determine 32-bit or 64-bit Windows Server 2003 Version
Windows Server 2008: Create & Set Up Hyper-V Virtual Machine
.NET Framework 3.5 feature couldn't be installed (Windows Server 2012)
© 2017 ITsiti. All Rights Reserved
Powered by KEEM